Dnf-controls 2MCE-24P User Manual

1 2MCE-24P, Two Machine, Cuts Only Editor 12843 Foothill Blvd. Suite C Sylmar, California 9

10 2MCE-24P, Two Machine, Cuts Only Editor f. PERFORM AN OFF SPEED EDIT 1) Select the PLAYER VTR. 2) Press [OFF SPEED]. The OFF SPEED i

11 2MCE-24P, Two Machine, Cuts Only Editor 11) Press [STOP] at anytime to abort the edit. 12) For OPEN-ENDED edits, press [OUT] to termin

12 2MCE-24P, Two Machine, Cuts Only Editor i. ONE MACHINE AUTOEDIT 1) Select the RECORDER VTR. Record mode must be Assemble or Insert.

13 2MCE-24P, Two Machine, Cuts Only Editor j. ONE MACHINE AUDOEDIT PREVIEW FUNCTION 1) Select Recorder VTR. Record mode must be Assem

14 2MCE-24P, Two Machine, Cuts Only Editor Reference . . . 5. SETUP MENU  Press [MENU]. The MENU indicator will turn on. Turn the Whee

15 2MCE-24P, Two Machine, Cuts Only Editor TCSOURCE Press [MENU] to select RECORDER or PLAYER as time source during edit. RECORDER is defa

16 2MCE-24P, Two Machine, Cuts Only Editor 6. FUNCTION TABLE Function Key Press Description AUTOEDIT [AUTOEDIT] Set IN time and (Option

17 2MCE-24P, Two Machine, Cuts Only Editor 7. SPECIFICATIONS Power 90 VAC to 265 VAC adapter supplied with IEC connector Size [

18 2MCE-24P, Two Machine, Cuts Only Editor 8. KEY LAYOUT

19 2MCE-24P, Two Machine, Cuts Only Editor 9. DNF CONTROLS LIMITED WARRANTY DNF Controls warrants its product to be free from defects in

2 2MCE-24P, Two Machine, Cuts Only Editor Table of Contents 1. REVISION HISTORY 3 GETTING STARTED . . . 4 2. DESCRIPTION 4 STANDARD F

3 2MCE-24P, Two Machine, Cuts Only Editor 1. REVISION HISTORY 100903 1.0 Original document. 112103 1.1 Added DNF Controls Limited War

4 2MCE-24P, Two Machine, Cuts Only Editor Getting Started . . . 2. DESCRIPTION The 2MCE-24P is a two machine Cuts Only editor with the ab

5 2MCE-24P, Two Machine, Cuts Only Editor 3. INSTALLATION a. ST300-S/SM, VTR/DDR CONTROLLER 1) Plug one end of a 9-conductor, RS422 ser

6 2MCE-24P, Two Machine, Cuts Only Editor f. SET THE RECORD DELAY 1) Press [MENU]. The MENU key indicator will turn on. 2) Turn the

7 2MCE-24P, Two Machine, Cuts Only Editor

8 2MCE-24P, Two Machine, Cuts Only Editor 4. OPERATION a. TRIM AN IN/OUT POINT 1) Press [TRIM+] or [TRIM –]. The display will prompt

9 2MCE-24P, Two Machine, Cuts Only Editor e. PERFORM AN EDIT 1) Select the PLAYER VTR. 2) Set the IN point by manually entering a time u